Architectural Wall Panels
Here you will find drawings, specifications, descriptions and PDF documents for Architectural Wall Panels, Soffit and Fascia from ROC INC.
Detail
Description
Factory formed, prefinished, lappable, exposed fastener, structural ribbed metal roof and wall system, that has been pretested and certified by manufacturer to comply with specified requirements under installed conditions.
Detail
Description
S E L E C T S E R I E S 1 2
• Classic concealed fastener flush panel design
• Ideal for long spanning walls, equipment screens, fascias and/or soffit applications
• Aesthetically pleasing for architectural, commercial and industrial applications
• 1 1/2" depth is stronger and spans greater distances than 1" panels
• Various stiffening bead patterns can be mixed and matched for multitudes of aesthetic designs
• Profile can be used with Select Series 612 panel variation for additional aesthetic designs
• Concealed fastened panel utilizing a screw flange requires no panel clips
• Panel ends can be swedged for end laps*
• Factory applied sealant is available
• Panels can be perforated upon special request
• .032" and .040" aluminum and 24, 22, and 20 gauge steel are available
S E L E C T S E R I E S 6 1 2
• Classic six up six down wall panel design
• Ideal for long spanning walls, equipment screens and/or soffit applications
• Aesthetically pleasing for architectural, commercial and industrial applications
• 1 1/2" depth is stronger and spans greater distances than 1" panel
• Profile can be used with Select Series 12 panel variation for additional aesthetic designs
• Concealed fastener panel utilizing a screw flange requires no panel clips
• Factory applied sealant is available
• Panel ends can be swedged for end laps*
• .032" and .040" aluminum and 24, 22 and 20 gauge steel are available
Detail
Specifications
• .032 aluminum and 24 gauge steel are standard
• Interlocking design with concealed fasteners allow for fast and economical installation
• Available solid or vented (9.2% open area)
• Standard lengths: 6'-45'
Back to Top
Panel Detail
Description
The Decor-Flush panels shall have one 12" wide raised rib for a total coverage of 12". The 12" rib shall have a depth of 1". At the buyer’s discretion, two minor stiffening ribs shall be centered in the flat of the panel to minimize potential oil-canning. The panels shall have an interlocking sidelap feature which hides the fasteners. Joints may be factory caulked to provide additional weathertightness. Panels shall be attached to the substrate with concealed fasteners.
Specifications
• Ideal for soffits, fascias and vertical wall applications
• Concealed fasteners for maximum aesthetic value
• Factory applied sealant at side joint
• Pencil grooves available
• Standard lengths: 6'-45'
Back to Top
Page Menu Items